SMH Series Hydraulic Cone Crusher is manufactured and designed through absorbing the latest world advanced technology and gets to be world advanced level. It is widely used in the fields of metallurgy, construction, hydroelectric project, transport, chemical industries and building materials for crushing all sorts of hard and above medium hard ores and rocks. The machinery’s pressure resistance strength is under 350Mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Cone Crusher is widely applied for primary crushing of many kinds of mining and rock , metallurgical, construction, road building, chemical and phosphatic industry. It is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, gritstone, etc. Resistance strength is under 350Mpa.
As the professional Cone crusher manufacturer, SANME will provide you with the most professional crushing equipments and all-around services.
Cone crusher can be thought as the "Upgrades Version" of gyratory crushing machines. Cone crusher breaks rock by squeezing the rock between an eccentrically gyrating spindle, which is covered by a wear resistant mantle, and the enclosing concave hopper, covered by a manganese concave or a bowl liner. And traditionally, in some area, we call it gyratory crusher too in mines and quarry.
1.The series of SMH cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The SMH Cone Crusher also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulicequipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5.The SMH Cone Crusher is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together.
6.The concave and mantle made by high manganese steel. Owing to the change of the concave’s style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
1.According on crushing material to select chamber ;
2.Feed rate is controlled;
3.Feed is average distribute at 360° crushing chamber;
5.Enough crusher discharge area;
6.Capacity of discharge conveyor is more than cone crusher;
7.Use right scalping and closed circuit screens.
8.Fine material of feeding is more than 10% of capacity;
9. Containing sticky material in feed;
10. Lack of feed control.
11.Feed is not averagely distributed around crushing chamber.
12.Horsepower is not getting to recommended.
13.Discharge area, discharge conveyor, scalper and screen are not sufficient.
14.Insufficient crusher discharge area.
15.Feed material is too hard or too tough.
|Model||Max Feed Size
|Capacity(t/h) -- open circuit, closed discharge(mm)|